The Rolleasy 2 above-ground automatic slatted cover is designed for pools from 2.00 x 3.00 m to 8.00 x 14.00 m.
An essential complement to the DEL automatic slatted covers, the hanging kits ensure that your pool is completely closed. A wide range of colours allows you to match the kits to the colour of your cover. Ask your pool specialist for advice.
Rolleasy 2 is a safety cover for swimming pool, intended to prevent the access to the swimming pool to the children of less than 5 years. This product complies with the NF P 90-308 standard. It is not a substitute for common sense or individual responsibility. It is not intended to replace the vigilance of parents and/or responsible adults, which remains the essential factor for the protection of young children. A child can drown in less than 3 minutes; no type of protection will ever replace the supervision and vigilance of a responsible adult. Warranty: 3 years for the motor and the blades, 2 years for the reel according to our general sales conditions. Manufacturing sheet: In order for the automatic slatted cover to be correctly adjusted to the pool, it is essential to provide a plan of the pool measured every meter. In accordance with the NF P 90-308 standard, the clearance between the inside of the pool and the edge of the automatic slatted cover must be less than 70 mm. Operating time: 3 minutes for automatic opening or closing and 30 seconds for locking or unlocking the safety kits. The opening and closing of the Rolleasy 2 is done by one person. Use: in all seasons. For a good functioning, maintain a constant water level corresponding to a normal filtration of the pool. It is essential to provide a water level regulator. The water level must be in accordance with the instructions. Limits of use: The installation of an automatic cover DEL on pools with overflow and/or with a staircase on the length (detachable staircase on the side) is not in conformity with the standard NFP 90-308. Another standardized device should be used. Unless otherwise specified by the manufacturer, the immersion alarms are not compatible with the covers DEL. Wintering : Winter the pool according to its geographical location. Without lowering the water level, close the automatic slatted cover in safety position and install a wintering net to protect the automatic slatted cover. If the water level is lowered, to put the parts to be sealed out of water, roll up the automatic slatted cover and secure the pool with a safety winter cover. Packing : for 5,00 x 10,00 m pool. Slats : 5 packages of 5,10 x 0,25 x 0,20 m - 250 kg / Mast : 1 package of 5,30 x 0,20 x 0,20 m - 30 kg / Bollards : 1 pallet of 0,50 x 0,45 x 0,35 m - 20 kg / Total weight : 300 kg.