The Rollinside automatic slatted covers is designed for pools up to 10.00 m wide (1-sided) and 6.00 m wide (2-sided, with a flat bottom at the box).
Rollinside 1-sided automatic slatted cover possible configurations :
Rollinside 2-sided automatic slatted cover :
An essential complement to the DEL automatic slatted covers, the hanging kits ensure that your pool is completely closed. A wide range of colours allows you to match the kits to the colour of your cover. Ask your pool specialist for advice.
Rollinside is a safety cover for swimming pool, intended to prevent access to the pool to children under 5 years. This product complies with the NF P 90-308 standard. It is not a substitute for common sense or individual responsibility. It is not intended to replace the vigilance of parents and/or responsible adults, which remains the essential factor for the protection of young children. A child can drown in less than 3 minutes; no type of protection will ever replace the supervision and vigilance of a responsible adult. Warranty: 3 years for the motor and the blades, 2 years for the reel according to our general sales conditions. Manufacturing sheet: In order for the automatic slatted cover to be correctly adjusted to the pool, it is essential to provide a plan of the pool measured every meter. In accordance with the NF P 90-308 standard, the clearance between the inside of the pool and the edge of the automatic slatted cover must be less than 70 mm. Operating time: 3 minutes for automatic opening or closing and 30 seconds for locking or unlocking the safety kits. The opening and closing of the Rollinside can be done by one person. Use: in all seasons. For a good functioning, maintain a constant water level corresponding to a normal filtration of the pool. It is essential to provide a water level regulator. The water level must be in accordance with the instructions. Limits of use: The installation of an automatic cover DEL on pools with overflow and/or with a staircase on the length (detachable staircase on the side) is not in conformity with the standard NFP 90-308. Another standardized device should be used. Unless otherwise specified by the manufacturer, the immersion alarms are not compatible with the covers DEL. Wintering : Winter the pool according to its geographical location. Without lowering the water level, close the automatic slatted cover in safety position and install a wintering net to protect the automatic slatted cover. If the water level is lowered, to put the parts to be sealed out of water, roll up the automatic slatted cover and secure the pool with a safety winter cover. Packing : for a pool of 5,00 x 10,00 m. Opaque PVC 84 slats 4 packages of 5,10 x 0,39 x 0,11 m - 190 kg / Solar polycarbonate slats and Opaque PVC 69 slats : 5 packages of 5,10 x 0,25 x 0,20 m - 250 kg / Pole : 1 package of 5,02 x 0,15 x 0,15 m - 37 kg / Beam : 2 packages of 5,02 x 0,15 x 0,15 m - 58 kg / Grating : 1 pallet of 1,20 x 1,00 x 0,50 m - 44 kg / Motorization kit + hanging kit : 1 package of 0,80 x 0,60 x 0,50 m - 41 kg / Mechanical sealing part : 1 package of 0,30 x 0,20 x 0,20 m - 5 kg / Beam support sealing part : 1 package of 1,00 x 0,20 x 0,20 m - 10 kg / Total weight : 395 - 405 kg.