Professional space

Rollenergy Evolution

Adaptable to all types of pools in construction and renovation

Rollenergy Evolution is an automatic slatted cover suitable for all types of pools, whether under construction or renovation, which does not require any structural work. Its waterproof tubular underwater motor is remotely controlled by a control box.

Product bonus

  • No structural work required
  • Easy to install
  • Submersible waterproof tubular motor
  • Ideal for renovation

For which pool?

The automatic slatted cover in-ground Rollenergy Évolution is designed for pools from 2.00 x 3.00 m up to 8.00 x 15.00 m.


  • Composite plate mounting system with 120 or 250 Nm tubular motor integrated in the mast.
  • Information management standard equipment for salt chlorinator.
  • Tubular motor in-ground waterproof
  • Curtain made of opaque PVC or polycarbonate solar slats.
  • The slats are available in various colours to match your surroundings.
  • Remote control via Wi-Key, LivePool or key switch.
  • Finishing grating for the IPE wood or aluminium shutter box.


Remote control box

Maximum security

An essential complement to the DEL automatic slatted covers, the hanging kits ensure that your pool is completely closed. A wide range of colours allows you to match the kits to the colour of your cover. Ask your pool specialist for advice.

How to use


  • Carry out a thorough cleaning of your cover twice a year (commissioning and wintering). This is especially important if the water in your pool is hard. To do this, use a high-pressure cleaner with warm water and a descaling agent.
  • Also take care to clean the attachment systems regularly, especially the piton, so that it does not become blocked. We recommend that you lubricate the hooks annually to ensure optimum performance.
  • An inspection of the entire system should be carried out in case of abnormal stress on the roof (falling).
  • Carry out an annual check of the straps.
  • Apply a saturator or treatment oil to IPE gratings once or twice a year.


  • Winterise the pool according to its geographical location.
  • Close the automatic slatted cover in the safety position.

Please read carefully and keep for future reference

Rollenergy is a safety cover for swimming pools, designed to prevent access to the pool by children under 5 years old. This product complies with the NF P 90-308 standard. It is not a substitute for common sense or individual responsibility. Nor is it intended to replace the vigilance of parents and/or responsible adults, which remains the essential factor for the protection of young children. A child can drown in less than 3 minutes; no type of protection will ever replace the supervision and vigilance of a responsible adult.Warranty : 3 years for the motor and slats, 2 years for the roller shutter in accordance with our general sales conditions. Manufacturing sheet: In order for the cover to be correctly adjusted to the pool, it is essential to provide a plan of the pool measured every meter. In accordance with standard NF P 90-308, the clearance between the inside of the pool and the edge of the cover must be less than 70 mm. Operating time: 3 minutes for automatic opening or closing and 30 seconds for locking or unlocking the security kits. The Rollenergy can be opened and closed by one person. Use: in all seasons. For a good functioning, maintain a constant water level corresponding to a normal filtration of the pool. It is essential to provide a water level regulator. The water level must comply with the instructions. Limits of use: The installation of an automatic DEL cover on pools with an overflow and/or with a staircase on the length (detachable staircase on the side) does not comply with the NFP 90-308 standard. Another standardised device should be used. Unless otherwise stated by the manufacturer, immersion alarms are not compatible with LED covers. Wintering: Winter the pool according to its geographical location. Without lowering the water level, close the cover in the safety position and possibly install a wintering net to protect the cover. If the water level is lowered, in order to keep the parts to be sealed out of the water, roll up the cover and secure the pool with a safety winter cover. Package size: for a 5.00 x 10.00 m pool. Slats 84 PVC opaque: 4 packages of 5.10 x 0.39 x 0.11 m - 190 kg / Slats solar polycarbonate and slats 69 PVC opaque: 5 packages of 5.10 x 0.25 x 0.20 m - 250 kg / Mast: 1 package of 5.10 x 0.15 x 0.15 m - 40 kg / Beam: 1 package of 5.10 x 0.15 x 0.15 m - 34 kg / Grating: 1 pallet of 1.20 x 1.00 x 0.50 m - 100 kg / Motorisation kit: 1 package of 0.60 x 0.35 x 0.35 m - 20 kg / Beam support: 1 package of 0.30 x 0.20 x 0.20 m - 10 kg / Hanging kits: 1 package of 0.30 x 0.20 x 0.20 m - 5 kg / Total weight: 400 - 410 kg.


Remember to order your winter shift to protect the Slats from UV and dirt.

find my pool specialist

Ask us for the contact details of the pool specialists closest to your work.

You may also be interested in these products