Home > automatic slatted covers > Pure Series
TheDEL PureDEL automatic slatted cover is designed for pools ranging in size from 2.00 x 3.00 m to 5.00 x 13.50 m.
An essential accessory forDEL automatic slatted covers , these mounting kits ensure that your pool is completely covered. With a wide range of colors available, you can match the kits to the color of your pool liner.
Ask your pool specialist for advice.
Maintenance
Wintering
The Pure Series is a pool safety cover designed to prevent children under 5 years of age from accessing the pool. This product complies with the NF P 90-308 standard. It is not a substitute for common sense or personal responsibility. Nor is it intended to replace the vigilance of parents and/or responsible adults, which remains the essential factor in protecting young children. A child can drown in less than 3 minutes; no type of protection will ever replace the supervision and vigilance of a responsible adult. Warranty: 3 years for the motor and slats, 2 years for the roller in accordance with our general terms and conditions of sale. Installation Guide: To automatic slatted cover the automatic slatted cover the pool correctly, it is essential to provide a plan of the pool measured in meters. In accordance with Standard NF P 90-308, the gap between the inside of the pool and the edge of automatic slatted cover be less than 70 mm. Operation time: 3 minutes for automatic opening or closing and 30 seconds for locking or unlocking the safety kits. The Moon can be opened and closed by a single person. Use: all year round. For proper operation, maintain a constant water level corresponding to normal pool filtration. A water level regulator is required. The water level must comply with the instructions. Limitations of use: Installing an automatic DEL cover DEL infinity pools and/or pools with a ladder along the length (detachable side ladder) does not comply with standard NFP 90-308. Another standardized device should be used. Unless otherwise specified by the manufacturer, immersion alarms are not compatible with DEL covers. Winterization: Winterize the pool according to its geographical location. Without lowering the water level, close the automatic slatted cover the safety position and, if necessary, install a winterization net to protect the automatic slatted cover. If the water level drops, to keep the sealing parts above water, roll up the automatic slatted cover secure the pool with a safety winter cover. Packaging: for a 5.00 x 10.00 m pool. Slats: 5 packages of 5.10 x 0.25 x 0.20 m – 250 kg / Pole: 1 package measuring 5.46 x 0.20 x 0.20 m – 30 kg / Posts: 1 pallet measuring 0.80 x 0.60 x 0.55 m – 40 kg / Total weight: 320 kg.