Rollinside

Rollinside is a pool safety cover designed to prevent children under 5 from entering the pool. This product complies with standard NF P 90-308. It is not a substitute for common sense or individual responsibility. Nor is it intended to replace the vigilance of parents and/or responsible adults, who remain the essential factor in protecting young children. A child can drown in less than 3 minutes; no type of protection can ever replace the supervision and vigilance of a responsible adult. Warranty: 5 years on tubular motor and 3 years on dry box motor. Opaque PVC 84 slats and Opaque PVC 69 slats are guaranteed for 3 years. Solar polycarbonate slats are guaranteed for 5 years. The roller is guaranteed for 2 years, in accordance with our general sales conditions. Order form: To ensure that the automatic slatted cover cover is correctly fitted to the pool, it is essential to supply a plan of the pool measured every meter. In accordance with standard NF P 90-308, the clearance between the inside of the pool and the edge of the automatic slatted cover must be less than 70 mm. Operating time for a 5.00 x 10.00 m pool: 3 minutes for automatic opening or closing and 30 seconds for locking or unlocking the safety kits. The Rollinside can be opened and closed by a single person. Use: all seasons. For proper operation, maintain a constant water level corresponding to normal pool filtration. A water level regulator is essential. Water level must comply with instructions. Limits of use: automatic slatted covers DEL on overflow pools can only be used if the pool is equipped with a device, such as an Infinity box, that automatically lowers the water level by at least 2 cm when the automatic slatted cover is closed on the pool. To date,DEL automatic slatted cover covers with a removable form on a side staircase do not comply with standard NF P90-308. Unless otherwise specified by the alarm manufacturer, immersion alarms are not compatible with automatic slatted covers DEL. Winterization: it is mandatory to winterize your pool, depending on its geographical location. Without lowering the water level, close the automatic slatted cover in the safety position and, if necessary, install a winterizing net to protect the automatic slatted cover. If the water level drops, to keep the parts to be sealed out of the water, roll up the automatic slatted cover and secure the pool with a safety winter cover . 2-sided packaging: for 5.00 x 10.00 m pool. Opaque PVC 84 slats : 4 packages of 5.10 x 0.39 x 0.11 m - 190 kg / Solar polycarbonate slats and Opaque PVC 69 slats : 5 packages of 5.10 x 0.25 x 0.20 m - 250 kg / Mast: 1 package of 5.02 x 0.15 x 0.15 m - 37 kg / Beam: 2 packages of 5.02 x 0.15 x 0.15 m - 58 kg / Grating: 1 pallet of 1.20 x 1.00 x 0.50 m - 44 kg / Motorization kit + hanging kit: 1 package of 0.80 x 0.60 x 0.50 m - 41 kg / Mechanical seal: 1 package of 0.30 x 0.20 x 0.20 m - 5 kg / Beam support seal: 1 package of 1.00 x 0.20 x 0.20 m - 10 kg / Total weight: 395 - 405 kg.